Spokane concrete supply inc

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your Washington home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right small concrete contractors contractor in Washington .

Steps To Finding The Right Concrete Contractor in Washington

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the small concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in Washington .

BEWARE OF CONCRETE CONTRACTOR SCAMS

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for small concrete contractors in Washington . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

The 2nd step is hire a knowledgeable masonry contractor in Washington . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in Washington .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

What Does a Concrete Contractor Do?

Building a concrete patio is not a real major project for a homeowner. With a little help on pour day to move and finish the concrete, you can depending upon the size of the patio, form and prep a patio one weekend and pour and finish it the next. If you can reach the patio with the redi-mix concrete truck the work is much easier but if you have to wheel barrow the concrete, you need to look real hard at what is involved. We will use a ten foot by twenty foot patio as our example.That size patio four inches thick would use 2.45 cubic yards of concrete. (10 x 20 x.33 /27=2.45) You would order three yards of concrete. A real good idea is to pre-make some stepping stones forms and use whatever concrete is left over from your patio pour. Once your new patio area is cleared of any rocks, brush or other debris you must remove any topsoil or sod that remains behind. Topsoil is very unstable when wet and can cause the ground to shift and thereby crack the patio. If you are filling in an area and want to pour right away it is strongly suggested you fill in the low areas with pure gravel. Gravel does not compact like earth and will not sink when wet. If you do not plan to pour the patio until a few months pass, you can use earth as back fill. Mother nature will help compact the earth with rain. If you can use a mechanical vibratory tamper, so much the better. In any case the ground beneath the patio has to be rock solid. If the patio has square edges you can form the patio with two by four lumber. Since the edge face of the patio will not show, the condition of the two by fours only need to be straight to provide a nice straight edge of the concrete.Knots or other blemishes do mot matter. Frame the patio edge and anchor the two by fours using wood stakes driven flush with the top of your form if possible. This will make screeding (leveling) of the concrete and edge finishing that much easier. If you desire a curved edge to your patio, cut some 1/4 inch plywood strips for forms as they are easily bendable.A ten foot by twenty foot patio can easily be poured and finished by two people. Tools you will need are, a straight edge twelve feet long, hand trowels or magnesium floats, edging finisher tool, center line finisher tool and a light wide broom for finishing. Assume that you can access the patio with the concrete truck, starting at one end the driver will drop the concrete right across the form work as you use your straight edge and trowels to push the concrete into its rough shape. A good driver can see how fast you are working and speed up or slow down the concrete placement.He can also place the concrete at a almost perfect four inches thick or nearly so. This saves a lot of back breaking labor pulling and shoveling the concrete into place. Once the concrete is in place some edge work can be done right away to smooth any areas that did not come out properly using the screed board. The concrete will have to sit for a short time depending on the weather and outside air temperature to get whats called an initial "set".You must keep a careful eye as if the concrete sets up too much it will become unworkable for finishing. As soon as a finger leaves a dent in the surface when lightly touched, use he edger tool and place a nice smooth rounded edge on the exterior of the patio. Using the center line tool with creates a double edge crease, place a dividing line in the center of the twenty foot dimension, making two ten by ten foot squares. This is done to control any cracks that may develop later.Using your hand trowels, gently smooth any ridges left by the edger tools. There is a magical moment when you must start using the broom to apply a broom finish. Too wet and the broom will sink, too dry and the broom will not leave brush marks. Just keep checking and you will know when to start. DO NOT leave the concrete to go eat or whatever. It is often a grave mistake that may ruin the entire job. Some words of caution. If you are pouring on a hot summer day in the sun, the concrete will dry very quickly. Make sure you have enough help to handle the concrete. Lastly if you cannot access the patio area with the redi-mix truck use this info to help figure how many extra people you will need. A yard of concrete is approximately 6-7 masons wheel barrows. Not the homeowners little plastic barrows, but the steel deep wheel barrows used on construction sites. They will be very heavy. Uphill they are even heavier. Three yards means there will be eighteen to twenty-one trips made back and forth. You will be placing the concrete as it comes to you so you need plenty of extra hands. Tools all have to be washed after using them as well as anything that the concrete was splashed on during the work. Concrete has lime in it which will etch glass, anodized finishes, cloth, vinyl siding and so on.Remove it as quickly as possible. Lastly, wear protective goggles and long sleeved shirts if your skin is sensitive. If you wish to apply a concrete stain for color, keep foot traffic off the patio to keep it clean and apply stain at the manufactures recommended time.

Concrete Products

If your patio is made of concrete you should know that time after time repairing or partial fixing of the concrete might be required. Although the material is solid and durable, sooner or later it becomes a subject to repair. Most often unfavorable weather conditions do badly warp the concrete. The article provides instructions on how to repair concrete patio if it has a crack, is damaged or flaked. We hope you will find all the necessary information here.Dealing with Cracks Things you will need: epoxy tubes, acid cleaning agent, concrete mix, and caulk gun.Instructions: Step 1. Get down to repairing works when the weather is not: hot, windy. The overcast sky on a cool brisk day would be the best choice. The thing is - the mixture should be able to dry as slowly as possible. Step 2. Thoroughly examine the surface to figure out how much injectable epoxy will be required to fix the existing cracks. Step 3. Buy the right size of epoxy tube and the caulk gun. Step 4. With an acid cleaner cleanse the whole spot. This chemical will let the new portion of cement get better fixed on the old one. Step 5. With the epoxy tube inserted in the caulk gun inject it into all cracks on the cement surface. Let epoxy dry. Step 6. Smoothly apply the concrete mixture evenly on the surface. Allow to dry before use. Dealing with Damages Rain (water) may easily worsen the existing damages on the cracked concrete patio.Instructions: Step 1. Using stone chisel remove all loose pieces. Step 2. With a grinder (plus abrasive masonry) widen narrow cracks for better filling. Step 3. Cleanse the spot; use a shop vacuum for holes / cracks. Step 4. Sprinkle the place with water; remove excess. Step 5. Remove the grout container tip, the cut should be a bit smaller than the crack width. Fill the crack with the grout. Step 6. If the crack is up to 0.5″ (or 12 mm), apply the grout in layers letting each dry completely. Note: You may use resurfacer for filling small cracks after the repair. Use pourable crack filler for deep small cracks.Dealing with Flakes In the freezing weather moisture may easily add flakes to the concrete patio. Begin repairing the patio only when sure it won't rain during the next 3-4 days. Instructions: Step 1. Remove loose pieces, cleanse the spot. Step 2. Use pressure washer (available in rental centers) to clear away tiny particles. Let the surface be damp but remove excess water. Step 3. Make the concrete mixture as per instructions. Apply the concrete to the holes using a small trowel or large putty knife. Remove excess. Step 4. Let the patch dry completely (15 - 20 hours). Step 5. When all flaked spots are patched and dry apply the "skim coat" over the whole concrete area; use paint roller. Note: You may walk on the surface after 48 hours, and move heavy objects after 72.We have almost fully equipped you with the necessary instructions and useful tips on how to repair concrete patio. God luck with the repair!

Washington patio concrete contractors

Spokane decorative concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your Washington home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right licensed concrete contractors contractor in Washington .

Steps To Finding The Right Concrete Contractor in Washington

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the licensed concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in Washington .

BEWARE OF CONCRETE CONTRACTOR SCAMS

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for licensed concrete contractors in Washington . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

The 2nd step is hire a knowledgeable masonry contractor in Washington . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in Washington .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

How To Choose Concrete Contractors

Building a concrete patio is not a real major project for a homeowner. With a little help on pour day to move and finish the concrete, you can depending upon the size of the patio, form and prep a patio one weekend and pour and finish it the next. If you can reach the patio with the redi-mix concrete truck the work is much easier but if you have to wheel barrow the concrete, you need to look real hard at what is involved. We will use a ten foot by twenty foot patio as our example.That size patio four inches thick would use 2.45 cubic yards of concrete. (10 x 20 x.33 /27=2.45) You would order three yards of concrete. A real good idea is to pre-make some stepping stones forms and use whatever concrete is left over from your patio pour. Once your new patio area is cleared of any rocks, brush or other debris you must remove any topsoil or sod that remains behind. Topsoil is very unstable when wet and can cause the ground to shift and thereby crack the patio. If you are filling in an area and want to pour right away it is strongly suggested you fill in the low areas with pure gravel. Gravel does not compact like earth and will not sink when wet. If you do not plan to pour the patio until a few months pass, you can use earth as back fill. Mother nature will help compact the earth with rain. If you can use a mechanical vibratory tamper, so much the better. In any case the ground beneath the patio has to be rock solid. If the patio has square edges you can form the patio with two by four lumber. Since the edge face of the patio will not show, the condition of the two by fours only need to be straight to provide a nice straight edge of the concrete.Knots or other blemishes do mot matter. Frame the patio edge and anchor the two by fours using wood stakes driven flush with the top of your form if possible. This will make screeding (leveling) of the concrete and edge finishing that much easier. If you desire a curved edge to your patio, cut some 1/4 inch plywood strips for forms as they are easily bendable.A ten foot by twenty foot patio can easily be poured and finished by two people. Tools you will need are, a straight edge twelve feet long, hand trowels or magnesium floats, edging finisher tool, center line finisher tool and a light wide broom for finishing. Assume that you can access the patio with the concrete truck, starting at one end the driver will drop the concrete right across the form work as you use your straight edge and trowels to push the concrete into its rough shape. A good driver can see how fast you are working and speed up or slow down the concrete placement.He can also place the concrete at a almost perfect four inches thick or nearly so. This saves a lot of back breaking labor pulling and shoveling the concrete into place. Once the concrete is in place some edge work can be done right away to smooth any areas that did not come out properly using the screed board. The concrete will have to sit for a short time depending on the weather and outside air temperature to get whats called an initial "set".You must keep a careful eye as if the concrete sets up too much it will become unworkable for finishing. As soon as a finger leaves a dent in the surface when lightly touched, use he edger tool and place a nice smooth rounded edge on the exterior of the patio. Using the center line tool with creates a double edge crease, place a dividing line in the center of the twenty foot dimension, making two ten by ten foot squares. This is done to control any cracks that may develop later.Using your hand trowels, gently smooth any ridges left by the edger tools. There is a magical moment when you must start using the broom to apply a broom finish. Too wet and the broom will sink, too dry and the broom will not leave brush marks. Just keep checking and you will know when to start. DO NOT leave the concrete to go eat or whatever. It is often a grave mistake that may ruin the entire job. Some words of caution. If you are pouring on a hot summer day in the sun, the concrete will dry very quickly. Make sure you have enough help to handle the concrete. Lastly if you cannot access the patio area with the redi-mix truck use this info to help figure how many extra people you will need. A yard of concrete is approximately 6-7 masons wheel barrows. Not the homeowners little plastic barrows, but the steel deep wheel barrows used on construction sites. They will be very heavy. Uphill they are even heavier. Three yards means there will be eighteen to twenty-one trips made back and forth. You will be placing the concrete as it comes to you so you need plenty of extra hands. Tools all have to be washed after using them as well as anything that the concrete was splashed on during the work. Concrete has lime in it which will etch glass, anodized finishes, cloth, vinyl siding and so on.Remove it as quickly as possible. Lastly, wear protective goggles and long sleeved shirts if your skin is sensitive. If you wish to apply a concrete stain for color, keep foot traffic off the patio to keep it clean and apply stain at the manufactures recommended time.

Hire a Concrete Contractor

It is important to note that masonry is not just the pouring of concrete to make a foundation of an edging mortar around the cracks of bricks. Materials commonly used by masons include brick, travertine, granite, limestone, glass, tile, concrete, and stucco. Masonry is highly regarded as a backbone of construction and its two commonly types used include brick and concrete.One of the main benefits of masonry is the good use of materials that increase thermal mass of a given building. Mortar and brick, usually do not need painting or any form of secondary covering. It is a great protection since it has high resistant features. The walls are designed to hold against many elements and therefore can withstand forces from tornadoes and hurricanes. A mason notes that most of the buildings that were constructed by use brick and limestone have lasted more than 500 years. It is important to note that there are some limitations in the use of masonry work. For instance, areas with extreme weathering are not ideal for masonry structures. This is so because they are likely to deteriorate with time. It is advisable to use other means of construction in such areas. Also mortar and brick are unlikely to survive intact for a long period of time in areas with frost and ice. This is so because the cold weather will chip away at the building structure. Also these areas have been reported to be difficult for masons and other building professionals to deal with. Reinforced concrete, brick and other materials may be heavy and therefore difficult to use since they need strong structural foundations.One of the greatest weaknesses of masonry is weak tensile strength though they are used in bolstering an impressive and great strength of handling heavy vertical loads. Any building that is constructed though this process is likely have problems arising from stretching and twisting unless it is reinforced by use of stable materials such as iron. This explains why solid masonry is probably becoming obsolete nowadays. Nowadays, solid and reinforced masonry is used or reserved for structures used in landscaping. The different types of masonry include dry set masonry, concrete block, veneer, solid masonry, brick and even serpentine. Masonry must have modern architecture and it's likely to be so for many decades to come because it is a link of the past and our future. Therefore hiring a great company is always a better option.

Washington patio concrete contractors

Spokane concrete driveway construction

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your Washington home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right licensed concrete contractors contractor in Washington .

Steps To Finding The Right Concrete Contractor in Washington

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the licensed concrete contractors contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in Washington .

BEWARE OF CONCRETE CONTRACTOR SCAMS

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for licensed concrete contractors in Washington . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

The 2nd step is hire a knowledgeable masonry contractor in Washington . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in Washington .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

Concrete: The Hot Trend in Bathroom Flooring

Are you a home owner? Do you want to renovate your home or build a concrete structure on your property? You may think that knocking down a wall or building a concrete garage is an easy job. But, remember not all DIY jobs are successful.

Expert Care for your Home

If you want your home to be sturdy and beautiful, you have to take care of it. And, who can give better professional care than an experienced concrete contractor? He/she will deliver quality results and save you from expensive problems in future. Choosing the right concrete contractor can make a huge difference to your home. So, how to choose the right person for your project?

Preparation is the Key

Start with a budget and know what kind of concrete installation or repair you want. If you are not clear about the project, you may end up spending more than your budget.

Once you have chosen the concrete contractor, make sure that every point discussed is present in the contract. It will help you in avoiding any conflicts in the future. A typical concrete project will include the following things:

1. Time estimate for finishing the project

2. Payment schedule

3. Information related to the material

4. Contact information of sub-contractors

Once you sign the concrete contractor for your project, he/she will start the work. It is important that you stay in constant touch with him/her and discuss any new issue.

Once the project is finished, stay calm. Do not make 100 percent payment until you receive copies of materials' receipt and lien releases from the sub-contractor.

How to Form and Pour a Concrete Patio

A home project with concrete work is a big task involving good amount of time and money. For a successful completion of a concrete job it is important to look for good concrete contractors. They are professionals committed to provide smooth job and final top notch product.

Concrete workers make the job done correct so it is essential to do some homework before hiring one. This homework involves searching more than one contractor in the surrounding area where the job needs to be done. Also it is important to calculate the project cost, what materials to use, comparing different materials and how much work is involved to do the job right. Once this list is completed, a person must ask some questions to a contractor before hiring him.

Concrete is the main building material for any construction job ranging from smallest yard blocks to the biggest bridges, all over the world. A concrete contractor uses this building material to build, design, fabricate or decorate something solid. So it is necessary to ask and research which type of concrete material is best for the job on hand. Different materials are used depending on the work, so it is better to select the right thing. A professional worker can help with this.

Another very important thing to know is whether the contractor has a valid insurance. It is necessary for him to carry a current liability and compensation insurance. It is a protection for the person who hires the workman and for workman and his employees in case they get any injury on the work.

These are some of important points to consider while hiring any concrete contractors. Good workmen are found with good homework of this kind.

Washington patio concrete contractors

Spokane small concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your Washington home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right concrete foundation companies contractor in Washington .

Steps To Finding The Right Concrete Contractor in Washington

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the concrete foundation companies contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in Washington .

BEWARE OF CONCRETE CONTRACTOR SCAMS

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for concrete foundation companies in Washington . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

The 2nd step is hire a knowledgeable masonry contractor in Washington . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in Washington .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

Concrete Contractor Makes a Big Mistake Ordering Concrete

Cement or concrete is one of the most common materials used for building patios. Cement patio designs offer various advantages: it's durable, versatile and relatively cheaper than other materials such as stone.Start creating your design by first determining what purpose your patio will serve. Patios are essentially outdoor extensions of rooms. So, if you want a patio that will serve as an extension of your living and dining areas, a 12 by 12 foot patio offers enough space for furniture as well as room to walk around in. If you want a patio that will visually connect your house to your garden, then you will have to incorporate more landscaping features into your patio design. Some great ideas include plant boxes, alcoves for shrubs and small trees, and maybe a trellis where you can grow flowering vines. The design ideas you can choose from are limitless. Some homeowners build patios that connect with other features in their yard such as a pool or a gazebo. You can also do this by creating a concrete path from the main patio to the said feature. If you already have an existing pool you can introduce a relaxing resort feel to your yard by creating a cement patio design that evokes the look and feel of resorts. Concrete is a versatile material and you can choose from different looks and add-ons to create the look that you want. A network of walkways will surely add to the beauty and functionality of your patio and yard. You can also add furniture such as umbrellas, rattan or wicker chairs, and lounges for that genuine resort ambience.When designing your cement patio, an important consideration is the size of your property. The patio should be proportionate to the size of your house and yard. A large patio can overwhelm a small house and will look out of place. Similarly, a small constricted patio will look awkward in an expansive yard. You should also check with your local building codes and zoning laws. Another important factor is of course, your budget. If you are working on a tight budget, then a cement patio design is the better choice for you. Concrete patios don't have to look grey and boring. You can always perk it up by using your creativity and usefulness. For example you can use blocks of wood, pieces of ceramic tiles, and even sea shells to accentuate the patio floor. Take a quick look at some online resources for patio design ideas and you can find a wide range of creative solutions for cement patio designs.

Weaknesses and Strengths of Masonry

A home project with concrete work is a big task involving good amount of time and money. For a successful completion of a concrete job it is important to look for good concrete contractors. They are professionals committed to provide smooth job and final top notch product.

Concrete workers make the job done correct so it is essential to do some homework before hiring one. This homework involves searching more than one contractor in the surrounding area where the job needs to be done. Also it is important to calculate the project cost, what materials to use, comparing different materials and how much work is involved to do the job right. Once this list is completed, a person must ask some questions to a contractor before hiring him.

Concrete is the main building material for any construction job ranging from smallest yard blocks to the biggest bridges, all over the world. A concrete contractor uses this building material to build, design, fabricate or decorate something solid. So it is necessary to ask and research which type of concrete material is best for the job on hand. Different materials are used depending on the work, so it is better to select the right thing. A professional worker can help with this.

Another very important thing to know is whether the contractor has a valid insurance. It is necessary for him to carry a current liability and compensation insurance. It is a protection for the person who hires the workman and for workman and his employees in case they get any injury on the work.

These are some of important points to consider while hiring any concrete contractors. Good workmen are found with good homework of this kind.

Washington patio concrete contractors