Yakima small concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your Washington home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right ready mix concrete delivery and pumping contractor in Washington .

Steps To Finding The Right Concrete Contractor in Washington

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the ready mix concrete delivery and pumping contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in Washington .

BEWARE OF CONCRETE CONTRACTOR SCAMS

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for ready mix concrete delivery and pumping in Washington . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

The 2nd step is hire a knowledgeable masonry contractor in Washington . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in Washington .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

Hire a Concrete Contractor

Cement or concrete is one of the most common materials used for building patios. Cement patio designs offer various advantages: it's durable, versatile and relatively cheaper than other materials such as stone.Start creating your design by first determining what purpose your patio will serve. Patios are essentially outdoor extensions of rooms. So, if you want a patio that will serve as an extension of your living and dining areas, a 12 by 12 foot patio offers enough space for furniture as well as room to walk around in. If you want a patio that will visually connect your house to your garden, then you will have to incorporate more landscaping features into your patio design. Some great ideas include plant boxes, alcoves for shrubs and small trees, and maybe a trellis where you can grow flowering vines. The design ideas you can choose from are limitless. Some homeowners build patios that connect with other features in their yard such as a pool or a gazebo. You can also do this by creating a concrete path from the main patio to the said feature. If you already have an existing pool you can introduce a relaxing resort feel to your yard by creating a cement patio design that evokes the look and feel of resorts. Concrete is a versatile material and you can choose from different looks and add-ons to create the look that you want. A network of walkways will surely add to the beauty and functionality of your patio and yard. You can also add furniture such as umbrellas, rattan or wicker chairs, and lounges for that genuine resort ambience.When designing your cement patio, an important consideration is the size of your property. The patio should be proportionate to the size of your house and yard. A large patio can overwhelm a small house and will look out of place. Similarly, a small constricted patio will look awkward in an expansive yard. You should also check with your local building codes and zoning laws. Another important factor is of course, your budget. If you are working on a tight budget, then a cement patio design is the better choice for you. Concrete patios don't have to look grey and boring. You can always perk it up by using your creativity and usefulness. For example you can use blocks of wood, pieces of ceramic tiles, and even sea shells to accentuate the patio floor. Take a quick look at some online resources for patio design ideas and you can find a wide range of creative solutions for cement patio designs.

Hire a Concrete Contractor

The concept of precast construction (which also refers as "prefabricated construction") includes those buildings where the majority of structural components are standardized and produced in plants in a location away from the building, and then transported to the site for assembly. These components are manufactured by industrial methods based on mass production in order to build a large number of buildings in a short time at low cost.The main features of this construction process are as follows: The division and specialization of the human workforce The flawless use of tools and other equipments, usually automated, in the production of standard, interchangeable parts and productsSince 2005, the demand for new commercial and residential buildings has been on the top than the other types of construction. Practically, precast construction is always more economical when compared to conventional multifamily residential, commercial, industrial or institutional construction anywhere in world.As per the load-bearing structural, precast construction can be categorize into the following categories: Large-panel systems Frame systems Slab-column systems with walls Mixed systemsList of Structural Precast Detailing Services: Precast Concrete Detailing Precast Wall Panels Detailing Precast Concrete Cladding Panels Detailing Precast Concrete Tilt-up Panels Detailing Precast Shop Drawings Precast Concrete Stairs Detailing Precast Erection Drawings Precast Concrete Column Detailing Precast Concrete Beam Detailing Precast Concrete Slab Detailing Post Tension Detailing Double Tee Detailing Non load bearing & Load bearing Column Cover and Cornices Hollow Core Slab Detailing Services Column Cap Plate Detailing Flat Slab Detailing Services As far as the concept of precast products is concerned, many states across the United States require a precast plant to be certified by either the Architectural Precast Association (APA), National Precast Concrete Association or Precast Prestressed Concrete Institute (PCI) for a precast producer to supply their product to a construction site sponsored by State and Federal DOTs.There are some numerous products which are utilizing precast/ prestressed concrete and majority of precast products can fall under one or more of the following categories: Agricultural Products Building and Site Amenities Retaining Walls Transportation and Traffic Related Products Utility Structures Water and Wastewater Products Cemetery Products Prestressed/Structural Products Double Wall Precast - Concrete Sandwich PanelsFurthermore, Tilt-up construction is also plays an important part of Precast Construction process. Of course, a question comes into your mind that, so what is the difference between tilt-up and other types of construction?The answer is, in traditional forms of wall construction, the walls can be built with CMU blocks or blocks faced with brick. A tilt-up building's walls are created horizontally in large slabs of concrete called panels. The panels are then lifted, or tilted up, into position around the building's slab. This means the tilt-up structure's exterior wall is virtually finished when it is tilted into place.Tilt-up construction provides numerous advantages over steel buildings either it is residential, commercial, institutional or other types of industrial building construction projects. Generally speaking, a one- to two-story structure larger than 50,000 square feet with less than 50% wall opening space is an excellent example for tilt-up concrete construction. Benefits of Tilt-up Construction:• Savings Construction Costs: by using this construction method, raw material costs can be reduced and of course it will also reduce the overall construction cost as well. In tilt-up construction method, the workers are typically lesser than the workers used in traditional construction. This way contractor can reduce labor costs. Because of the economies of scale, the larger the footprints for the building, the more these savings improve the project's total cost.• Fast Construction Schedule: Tilt-up construction offers several opportunities to "compress" the schedule and deliver the building very quickly. To erecting the walls in tilt-up construction is a faster process than building walls using traditional construction techniques. The trades can begin work earlier in the process on a tilt-up project, which allows greater overlapping of project phases. Because the building is made of ready-mix concrete from local sources, the chances of delay project is less than the traditional construction method.• Safety: Tilt-up concrete is a proven, safe method of construction.• Flexibility: Tilt-up concrete buildings are not prefabricated. Each one is custom-designed for the client's needs and preferences.

Washington patio concrete contractors

Yakima top concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your Washington home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right american concrete company contractor in Washington .

Steps To Finding The Right Concrete Contractor in Washington

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the american concrete company contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in Washington .

BEWARE OF CONCRETE CONTRACTOR SCAMS

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for american concrete company in Washington . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

The 2nd step is hire a knowledgeable masonry contractor in Washington . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in Washington .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

How to Choose the Right Concrete Contractor?

A concrete contractor is a specifically trained and experienced individual or team that is able to manage concrete in its various stages from an unmixed combination to the hard finished product that is produced. A qualified Concrete Contractor can design intricate plans with expert industry knowledge and experience, allowing homeowners to create their own perfect custom products for renovations in their own homes today.

The contractor will oversee delivery and ensure the concrete is poured correctly. The product will then need to be worked with by an expert to produce a leveled and smooth surface that will be able to cure properly. Ensuring this process is completed accurately is one of the key procedures that need to be handled carefully and diligently by the professional involved.

All great contractors can custom design features for their clients using their knowledge, skill and different techniques to ensure the best possible results with excellent customer satisfaction. Uniquely designed plans will be functional and structurally sound with patterns or color added to suit a customer's project idea.

Delivering the best options, quality and pricing to suit everyone's needs; a professionally trained Concrete Contractor will be able to provide the highest quality completed projects with top structural standards and ongoing customer support during and after the work is finished. A concrete contractor will ensure the expectations of a client are met at all times throughout the process of any construction with the most effective, reliable and reputable service available in the market today.

Concrete: Its Types and Uses

For various home improvement projects, especially those that involve using concrete, most homeowners get the services of concrete contractors, as they are more knowledgeable in the process of such home improvements. However, given that there is quite a number of contractors who offer their services, finding the right contractor can be a bit of a challenge. Fortunately, doing an adequate amount of research can make the search a lot easier as you can be armed with the information that you need to help you pick the best contractor for your building needs. This research involves employing the same strategies used in canvassing for services from a number of companies that offer them.

Getting the right concrete contractor can be a challenge given that there are a large number of contractors that provide their services, especially on the Internet. Given this, there are other steps you could to take, which includes asking for referrals from family and friends, to help you search for the that right concrete contractor for your building needs.

Washington patio concrete contractors

Yakima concrete contractors delaware

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your Washington home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right concrete foundation companies contractor in Washington .

Steps To Finding The Right Concrete Contractor in Washington

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the concrete foundation companies contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in Washington .

BEWARE OF CONCRETE CONTRACTOR SCAMS

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for concrete foundation companies in Washington . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

The 2nd step is hire a knowledgeable masonry contractor in Washington . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in Washington .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

What is Stamped Concrete?

Stamped concrete is created from a slab of fresh concrete. Before the concrete fully dries it is colored and then textured patterns are impressed into the concrete. The homeowner chooses the pattern and colors of their preference. A project can be made to look like natural stones, tile, wood, cobble stones and more.Stamped concrete is often preferred over pavers because it is much easier to maintain. Over time pavers tend to sink into the ground and it is very easy for weeds to grow in-between pavers. With stamped concrete this does not happen since it is a continuous slab of concrete. In addition, when your stamped concrete doesn't look so new anymore, you can simply have it resealed and you will instantly have a vibrant patio. If you already have an existing patio and want the decorative look then stampable overlays are the way to go! Stampable overlays are used to resurface existing concrete. If you have a patio that is just plain boring a stampable overlay can bring new life to your backyard. The process is similar to installing stamped concrete. You choose the pattern and colors for your project. Your existing patio is covered with about 1/4 to 3/8 inch of the stampable overlay. When the job is complete you will have a beautiful stamped patio! Stamped concrete is also a terrific way to add value to your home. By adding a patio to your backyard or having a concrete driveway, you add a higher level of elegance and desire to your home.

Concrete Products

We are always looking for ways that we can add to our home. It might be in adding a specific type of siding or roofing, through updating the landscaping or perhaps by making our driveway smoother and easier to use, but the reality is that we are always on the lookout for something that can help us stand out from the rest.

When it comes to adding a feature that is practical and yet versatile one such option is to incorporate concrete construction elements. Be it a masonry patio, an outdoor fireplace, building a lanai or having an outdoor kitchen, the use for masonry are as numerous and varied as your imagination or budget. And, speaking of budget, because of its durability and ease of maintenance, opting for concrete construction is one of the most budget friendly choices available.

4. Need help with erosion? Add a masonry retaining wall and keep the dirt and lawn where you want it.

5. Use concrete to design a raised bed area for your yard

Concrete construction is nothing new, as it has been used in architecture for years. However, we sometimes forget just how perfect it is for so many decorative elements. If you are trying to determine what to do with the appearance of your home or landscape, be sure to consider employing masonry features. You just might be surprised at their versatility. Talk to a local concrete professional today.

Washington patio concrete contractors

Yakima licensed concrete contractors

How to Find a Good Patio Contractor

Have you decided you want a flagstone, limestone or concrete patio for your Washington home. Wondering how to get it done and who you should use? Well, I’m going to tell you how. I’m going to give you a step by step process stating the 3 red flags that signal a bad or uneducated [tag] contractor. These 3 things will ensure you get it done the right way, by the right concrete foundation companies contractor in Washington .

Steps To Finding The Right Concrete Contractor in Washington

First step, first things first. Every Stone Installation Needs A Concrete Footing which might also be called a concrete foundation . This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it’s done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the concrete foundation companies contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won’t withstand the climate, erosion and soil movement beneath the patio in Washington .

BEWARE OF CONCRETE CONTRACTOR SCAMS

You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of ” no concrete necessary” is most often offered to those with strict financial limitations. The contractors offering this solution don’t care about your patio or home, they just want your money.With no concrete foundation you get a type of patio, but it’s really just a veneer laid on the ground.

How much concrete do i need?

A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations for concrete foundation companies in Washington . If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.

The 2nd step is hire a knowledgeable masonry contractor in Washington . Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it’s his livelihood. A contractor who can’t do this or doesn’t seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he’s knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they’ve done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number

3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime from any concrete contractor in Washington .If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they’re doing.

How to Choose the Right Concrete Contractor?

The type of concrete that you order can be the difference between having a successful project or ending up with something that you will be tearing out in the future. If you're building a concrete patio, and it's going to be built In expansive soil, you might think about using a stronger concrete mix.The concrete strength will usually be determined by the amount of cement that will be used, water, sand and rock. The size of the rock and the type of cement will also play an important role in the strength of the concrete. A typical concrete strength that can be used for almost any project, will be around 2500 psi and we need to pay attention to these numbers as they get larger. The mixtures strength usually goes in 500 PSI increments and these increments are usually increased by adding more cement or larger rock, for each cubic yards of concrete.In other words, a 2500 PSI standard concrete mix usually has 5 - 90 pounds sacks of cement, where a 3500 PSI mix, wIll have 6 - 90 pounds sacks of cement in it. This will also depend on the rock size that will be used, to create the specific concrete mix.The size of the rock, will also help in determining, how strong the concrete will actually be. Let me give you an example: the smaller the rock, the more cement that will be required to create the same amount of structural strength, per cubic yard.With all that said, if you're just pouring a sidewalk or a driveway, you can contact your local concrete supplying company for a recommendation. I have been doing this for years and they haven't let me down yet. Usually the concrete companies have plenty of experience and know exactly what kind of concrete mixture you need for your area and project. If your neighbors have large cracks in their concrete driveway, you might want to hire a professional, to get some advice. Large cracks might mean there are problems with your soil and will require additional construction methods.

What Kind of Concrete Do I Order? Specific Concrete Mixes

Have you decided you want a flagstone, limestone or concrete patio. Wondering how to get it done and who you should use? Well, I'm going to tell you how. I'm going to give you a step by step process stating the 3 red flags that signal a bad or uneducated contractor. These 3 things will ensure you get it done the right way, by the right contractor.First step, first things first. Every Stone Installation Needs A Concrete Footing. This is not opinion but fact. If you want it done right and want it to withstand the test of time, this is the way it's done, no exceptions. A red flag should go up when any contractor is offering bypassing a concrete foundation as a cost saving option. Unfortunately 85% of the contractors out there will tell you they can lay the stone right on top of compacted granite or base material. This type of contractor is exactly who you want to avoid. While what they are recommending to you gives the appearance of a patio, it won't withstand the climate,erosion and soil movement beneath the patio. You might get a few crackless years at best, until it begins to fall apart. This method is the most recommended scam or shortcut of trying to lower pricing and still get the job. Notice the price came down because the concrete footing was removed from the job cost. This option of " no concrete necessary" is most often offered to those with strict financial limitations. The contractors offering this solution don't care about your patio or home, they just want your money.With no concrete footing you get a type of patio, but it's really just a veneer laid on the ground. A concrete patio or sidewalk slab or footing should be a minimum of 4 inches thick. This is sometimes reduced to around 3 1/2 inches due to preexisting structural limitations. If you encounter space limitations, you really do need a good masonry contractor to resolve the issues with other options. this leads us to our next step.The 2nd step is hire a knowledgeable masonry contractor. Do a little research before you start getting pricing. Most good masonry contractors will be able to talk concrete chemistry and technology with you. Yes, I said technology. In the last 10 years there have been some really cool advances in concrete additives and mixes. These advances have provided solutions for the problems and limitations of old. A true patio or masonry professional will be able to talk shop with you, it's his livelihood. A contractor who can't do this or doesn't seem comfortable is more than likely a novice at best. This should be the other red flag that goes up. Basically, Concrete slabs and mortar are like a cake mix. Correctly mixing the ingredients and correctly letting the slab or masonry product cure, are the factors that determine a good solid installation. Again, Talk with your contractor and Make sure he's knowledgeable about the chemistry, additives and curing process of concrete & masonry. If he is this will ensure the likelihood of a great patio. 3rd step and last but definitely not least, Check references, check reviews and ask to see work they've done. Really check this stuff out and try to look at at least 1 job they have done. Ask point blank if the previous client is related to the contractor. Any resistance or confusion in this process would be red flag number 3.So, in order from 1 to 3. All masonry installations need a concrete footing. Make sure your patio contractor is knowledgeable about masonry chemistry, additives and enhancing solutions. Check references, reviews and stay away from the dirt cheap deals of a lifetime.If you get even 1 red flag, get another contractor. There are enough guys out there that do know what they're doing.

Washington patio concrete contractors